Your shopping cart is empty!
Raymarine EV-300 Power Solenoid Evolution Autopilot T70160
Raymarine EV-300 Power Solenoid Evolution Autopilot T70160
Raymarine Evolution ACU Specifications
|
|
Models |
E70096: EV-1 |
|
E70097: EV-2 |
|
|
Nominal supply voltage |
12 V (powered by SeaTalkng system) |
Operating voltage range |
10.8 V to 15.6 V dc |
Power consumption
(taken from SeaTalk ng system) |
30 mA |
SeaTalkng
LEN
(Load Equivalency Number) |
1 |
Sensors |
3-axis digital accelerometer 3-axis digital compass 3-axis gyro digital angular rate sensor |
Data connections |
SeaTalkng
NMEA 2000 DeviceNet (EV-2 only) |
Installation environmental |
Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF) Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF) Relative humidity: max 93% Waterprrof rating: IPX 6 |
Dimensions |
Diameter: 140 mm (5.5 in) Depth (including mounting enclosure): 35 mm (1.4 in) Depth (including wall bracket): 95 mm (3.8 in) |
Weight |
0.29 kg (0.64 lbs) |
EMC compliance |
Europe: 2004/108/EC Australia and New Zealand |
Raymarine Evolution - EV-1 and EV-2 Specifications
The p70R features a rotary dial control for power boaters. Use the rotary dial for menu and course changes or activate power steer mode and steer manually right from the p70R.
LightHouse organises all options into simple menu structures and with
Evolution’s quick setup process you will be up and running in minutes.
Designed for sailing yachts, the p70 offers simple 1 and 10 degree direct course
change push buttons.
Complete your Evolution autopilot system with a p70 or p70R autopilot control. The p70 and p70R control heads feature vibrant colour displays and are powered by Raymarine’s intuitive LightHouse user interface.
p70 and p70R Autopilot Control Heads
EV-1 Systems with Raymarine Drives
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. |
|
EV-2 for Steer-By-Wire Propulsion
Designed for the latest drive-by-wire steering system, the EV-2 connects directly to Raymarine’s SeaTalk ng bus and also features a dedicated CAN Bus port for direct connection to steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex Optimus systems. The single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation.
|
Your Evolution Autopilot System
|
Supported Drives |
ACU-200 |
Type 1 Raymarine hydraulic, linear and rotary mechanical drives |
ACU-300 |
For solenoid controlled steering systems and Raymarine constant running hydraulic pumps |
ACU-400 |
Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives |
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalk ng bus. Choose the ACU that fits your steering system type:
Autopilot Control Unit (ACU)
- Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change.
- Flexible installation options. Mount above or below deck.
- Simple SeaTalkng connectivity to the control head and ACU.
- Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions.
- Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes.
- Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays.
EV Sensor Core Benefits
Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
At the centre of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.
The EV Sensor Core
Thanks to the intelligent EV sensor core,
the autopilot automatically evolves and adapts to your vessel’s steering
characteristics without any user adjustments.
Evolution AI™The culmination of Raymarine’s 30 years of autopilot expertise, FLIR Systems research and development, and advanced aerospace guidance technology, Evolution AI™ control algorithms deliver a new level of accurate autopilot control. This innovative breakthrough in autopilot intelligence enables Evolution autopilots to perceive their environment and then instantly calculate and evolve steering commands to maximise performance. The result is precise and confident course keeping, regardless of vessel speed or sea conditions. |
Engineered for simplicity, Evolution autopilots eliminate the need for complicated set up and calibration. Once Evolution is installed, getting started is as easy as switching the autopilot on.
No calibration required!
- EV-1 Sensor Core
- p70Rs Autopilot Control Head
- ACU-300 Actuator Control Unit
- Evolution Cabling Kit
- EV Unit O-Ring Pack (set of 2)
- Wall Mounting Bracket
Includes:
Evolution Autopilot
|
|
|
|
|
Model |
ACU-100 |
ACU-200 |
ACU-300 |
ACU-400 |
|
E70098 |
E70099 |
E70139 |
E70100 |
|
||||
Drive Current Output |
Maximum continuous
7 A at supply voltage |
Maximum continuous 15 A at supply voltage
|
Maximum continuous 5 A
at supply voltage |
Maximum continuous
30 A at supply voltage |
Drive Clutch Output |
No clutch connection
|
Up to 2.0 A continuous, selectable between 12 /24 V
|
No clutch connection
|
|
Connections |
|
|
|
|
Nominal supply voltage |
12 V |
12 V or 24 V |
||
Operating voltage range |
10.8 V to 15.6 V dc |
10.8 V to 31.2 V dc |
||
Power consumption (standby) - main power supply |
300 mA (12V) |
300 mA (12/24 V) |
||
Power consumption (standby) - SeaTalk ng power supply |
No power supply to SeaTalkng |
20 mA (12V) |
||
SeaTalkng
LEN
(Load Equivalency Number) |
1 |
|||
SeaTalkng Power out |
No power supply to SeaTalkng |
3 A at 12 V (fuse protected at 3 A) |
||
Data connections |
SeaTalkng |
|||
Installation environment |
Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF) Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF) Relative humidity: max 93% |
|||
Waterproof rating |
Connector panel: IPX2 Drive electronics: IPX6 |
Drip resistant |
||
Dimensions
(W x H x D) |
180 mm x 140 mm x 52 mm (7.1 in x 5.5 in x 2.0 in) |
285 mm x 211.5 mm x 64.5 mm (11.2 in x 8.3 in x 2.5 in) |
||
Weight |
0.6 kg (1.32 lbs) |
2.2kg (4.84 lbs) |
||
Conformance |
Europe: 2004/108/EC Australia and New Zealand: C-Tick, Compliance Level 2 |
Related Products
Raymarine EV-100 Auto Pilot with p70s Controller Corepack Only - No Drive Unit T70281
Evolution Autopilot, MFG# T70281, with p70s control head, ACU-100, EV1 Sensor Core, and EV1 Cabling kit. Suitable for 0.5L Hydraulic Pump, Wheel, and Tiller drives). Evolution Autopilot ..
Raymarine EV100 Power Evolution Autopilot with 6.7 cubic inch Pump T70154
The 0.5ltr Hydraulic Pump is intended to operate the boat’s steering mechanism as part of a Raymarine autopilot system and for a boat up to 7,000 lb displacement. It is primarily designed for us..
Raymarine EV-150 Evolution Core Pack - No Drive T70407
Evolution EV-150 Hydraulic Autopilot System PackThe Evolution EV-150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruis..
Raymarine P70Rs Autopilot Controller with Rotary Knob E70329
Complete Your Evolution Autopilot System With A New Control HeadThe new control heads are available in two control styles. The Raymarine p70s autopilot control head is a push-button operation contro..
Raymarine EV-DBW Evolution Autopilot for Volvo T70214
Raymarine EV-DBW Evolution Autopilot for Volvo T7021EV-DBW Evolution Autopilot for Volvo The EV-DBW Volvo has been designed for the latest drive-by-wire steering systems and connects directly to R..
SIMRAD AP44 VRF Autopilot Pack Medium Capacity
This complete autopilot pack includes everything you need to upgrade your outboard or sterndrive up to 35' with a Simrad Continuum autopilot system.Set your heading and access advanced pilot modes..
SIMRAD AP48 Autopilot Controller
The AP48 Autopilot Controller is a premium dedicated control head for Continuum autopilot systems, enhanced with modern glass helm styling.Engineered for responsiveness and ease of use in all cond..